Home > Windows Xp > How Do I Wipe My Computer Clean Windows Xp

How Do I Wipe My Computer Clean Windows Xp

Contents

to set at maximum size, or you can use the keypad to change the value, and sometimes you can name the partition. This is what the Win XP System Setup Disk above does. Here's how to do it: Start the computer with your chosen boot disk. Change to the cdrom drive. STEP-BY-STEP A. What is Supported Drivers and software for operating systems other than the one that originally came with the computer are provided for customer convenience. http://flashcodehacks.com/windows-xp/windows-xp-clean-install-without-cd.html

If you are working with a hard disk that has multiple partitions and would like to delete one or more of them, perhaps to later create a single partition (using New, I keep a version 6.2 DOS system disk handy for this very purpose.First make sure your BIOS is set to allow you to boot from a floppy drive. Agree to licensing In this phase of Setup, you must agree to the Windows Vista End User License Agreement (EULA). What are the positives Slightly better performance, a smaller footprint on the hard drive, knowledge that nothing is carried over from a previous OS. Go Here

How Do I Wipe My Computer Clean Windows Xp

Click Next > when complete.

In the next window (not shown), enter the Windows XP product key. It is provided for general information only and should not be relied upon as complete or accurate. First make sure you want to reformat, when the select screen cames up you should select windows so you computer does not go into booting up XP.

Click START-CONTROL PANEL-SYSTEM-HARDWARE-DEVICE MANAGER. (Select Classic View) If you have any Yellow Exclamation Points, you will probably need to install drivers for these devices from your CD for that piece of If not they will need to repurchase a new Key Code or request a replacement from Microsoft. If you are planning to overclock, make sure you check your MOBO manual to see which sata ports are locked. Windows Xp Installation Steps Pdf Installing drivers intended for other computer models may generate unexpected results or the system may be rendered inoperable.

Burn the downloaded drivers to a CD or DVD.

I want to set them up in raid0. Reinstall Windows Xp Without Cd I also recommend using Windows Restore to save a Restore Point at this point. Your ISP will usually help you get connected.9) Install applications.10)Retrieve any important files from the backup made in step 1. (Do Not try to Restore anything from the backup, just copy And if you want to learn step by step on how to "slip stream" and create a bootable disk of your own, go to tomshardware.com and look down the page to

I want to format the hard drive and put a non-NT format and windows 98SE back on. How To Reinstall Windows Xp Without Losing Data You will need to make sure you have your drive backed up before you make any changes to your system, such as installing a new peripheral, or even a new program. It won't actually read from the floppy disc yet. (If you've never formatted a computer before, you have no business trying to set up a Raid) Watch the bottom of the If your driver is not on the list, please use the UP and DOWN arrow keys to locate the proper SATA/RAID driver.

Reinstall Windows Xp Without Cd

Do you have a big project coming up for work/school that you need to finish? My System Specs OS Windows XP SP3 CPU Intel Core i5 750 Motherboard Asus P7P55D Memory Geil 2X 2GB 1333MHz DDR3 Graphics Card Sapphire Radeon HD 4890 Vapor-X PSU Cooler Master How Do I Wipe My Computer Clean Windows Xp Also, many programs, such as Musicmatch, require you to type a ?key? How To Wipe Windows Xp To Factory Settings Turn on the computer.

This will be as close to a clean install as possible without actually clean installing. navigate here And don't worry about peripherals it is of least concern.The first thing what you should do is to BACKUP YOUR DATA!If you have two or more partitions then you can copy The exceptions being systems with proprietary hardware and system utilities like laptops and some OEM desktops. Do I need to format the drive somehow in Windows before I try to tinker with the BIOS? How To Wipe A Windows Xp Computer Without Disc

If you have several internal cards that you added after you purchased the computer, you may need to remove these. 3. the first option is to use the Windows XP cd .. Again press the enter key to finish the boot. Check This Out You can decide.It should start formatting now and after format the setup should start automatically.During the setup you will be prompt to insert your Serial Key and also date and time

Notes: The proper SATA/RAID driver will be displayed under the Hard Drive tab on the Sony eSupport USA page specific for your model. How To Format And Reinstall Windows Xp When that's done, it will ask again. Set your Time Zone and Time and Date. 22.

Although it should not make a difference, if you have doubts, use logic... (Mainboard first, then display etc..).

There are exceptions where a clean install can impair the performance over a well prepared upgrade. That said, I currently have 2 drives in my system. I always use the default name.10) You should once again see the screen that you saw in step 6, now, go to the partition that you just created, and follow the How To Wipe Windows Xp Without Disc Simply press the enter key to continue.

Start the deletion process by entering 3 in the Enter choice box.This will bring you to another menu with four options 1. I have also tried to download the network adapters onto a USB stick and tried to transfer to my laptop but it wont transfer as I need to download the usb This is the Activate, Register screen. http://flashcodehacks.com/windows-xp/how-to-uninstall-windows-xp-from-computer.html Once you install all your hardware you will have to update all the drivers as well.

If you are planning to dual boot XP, I would create a small 100 meg DOS partition for the first primary partition, then an 8 to 10 gig partition for XP. Note: There may be some limitation of the function keys. Insert the blank Floppy Disc into the USB Floppy Disk Drive. This is what you want as any problem you are now encountering will be removed from the system.To finish the installation process, simply make sure your BIOS will allow you to

Start your computer and go into the bios. (Press the delete key or your specified key) as the computer is booting up In the bios find and enable the Raid/SATA Ports Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. I later (after much trouble with Me) installed XP Pro and all went well for a year or so, which leads me to where we are now.The only internal stuff that What I would do, but it's a lot more work, would be to clean the existing disks to start fresh.

To begin the Windows XP clean install process, you will need to boot from the Windows XP CD.

Watch for a Press any key to boot from CD... But you should absolutely create a password. If there is a version of Windows XP already installed on the PC, run the Windows Vista Upgrade Advisor to check on hardware compatibility issues. There are many programs that you can use to make a back up of everything on your hard drive.

Check hardware compatibility You will want to immediately access Device Manager to find out whether there are any hardware devices connected to your system that need drivers.