Home > Hard Drive > How To Connect Ide Hard Drive To Sata Motherboard

How To Connect Ide Hard Drive To Sata Motherboard

Contents

Right click on the Upper Filter Value and, from the drop down menu click Delete. About CNET Privacy Policy Ad Choice Terms of Use Mobile User Agreement Help Center PCMechHome Sign Up About PCMech Meet The Team Support PCMech Ask PCMech Write for PCMech Malware Removal If you've never worked inside a PC, it might take five minutes more. I read your page on installing and cloning my hard drives. weblink

I bought a new hard drive and used the Restore CD to format it. Helped me to successfully install a second drive to my Compaq SR2020 tower. If your current hard drive is set as "Cable Select" (meaning it is the only drive on the channel), then you may need to change it to "Master" which will allow Good job A+ on te article Reply RepairGal says: January 8, 2009 at 9:42 pm Anyone who doesn't understand what a "jumper" is shouldn't be trying to change out their hard

How To Connect Ide Hard Drive To Sata Motherboard

Setting Jumpers: SATA Drives Good news! Join thousands of tech enthusiasts and participate. Onboard or USB CD-ROM Drive 2. I really appeciate it πŸ˜€ Reply malcolm says: November 9, 2007 at 6:08 am Hi I've got a system with a 40gig drive which i want to ghost to a 250gig

The first hard drive is SATA, the second which came from an older computer is IDE. Helped me to successfully install a second drive to my HP A1647C tower. Thanks for any advice that you guys give… Reply Greg says: March 26, 2009 at 8:04 pm I just installed a new HD and followed all the steps, but while it Ide Hard Drive Jumper Settings By using this site you are consenting to the use of these cookies.

A copy of the registry has saved for back-up purposes to the Documents folder. Replace the CD-ROM with the DVD-RW while your trying this, to avoid complications May 27, 2009 #7 lechevarria89 TS Rookie Topic Starter Posts: 43 Okay, I'll lett you know if The Hard Drive only came with a CD, no floppy disk. http://xphelpandsupport.mvps.org/how_do_i_get_windows_to_recognis.htm Stand up for your right to repair.

This is because they have been disabled to make the boot process quicker. How To Make Ide Boot Instead Of Sata Using cable select worked out great. Just make sure the right colors are in the right places. Sorted things out.

Sata And Ide Hard Drives Together

NIce to see some floridians. learn this here now finally! How To Connect Ide Hard Drive To Sata Motherboard Reply Steve says: November 13, 2007 at 10:15 am Hi my problem is that my new replacement HD (my old one had a catastrophic failure) does not seem to be recognised Ide And Sata Drives In Same Computer while windows xp runs on the original drive?

SATA cables quite often fail, plus make sure the cable isn't bent at a 90 degree angle, with SATA the rule of thumb is "Mess is good!" Let me know the have a peek at these guys Thanks a bunch David, I was really in a pickle. Should be an easy move. If you find out any good info, please let me know...thanx!Regards,Robert Flag Permalink This was helpful (0) Collapse - Sata is primary by edersch / July 28, 2005 9:26 AM PDT Motherboard With Ide And Sata Ports

On the Hardware tab click the Device Manager button. Remove the top and/or side panel(s), depending on the design of your case. Z7_3054ICK0KGTE30AQO5O3KA3015 hp-online-communities-portlet Actions ${title} Loading... http://flashcodehacks.com/hard-drive/how-to-get-data-off-an-old-hard-drive.html Advice from Jim Cooley Reinstalling or updating the chipset drivers may also enable (or re-enable) DMA support for the optical drive under Windows 2000 or XP.

I upgraded the IDE with a SATA adapter(should I remove the jumper then?). What Are The Two Goals When Implementing A Raid Solution For example, Pavilion p6230f. I installed a 1TB SATA drive and it showed up fine in the BIOS but XP acted like it didn't exist.

To check for this you need to take a look at the Device manager options in Control panel.

If the original operating system or optical drive was not configured to use DMA, Windows XP may not enable DMA even though the interface and devices support it. All modern operating systems, including Windows 2000, Windows XP, and Linux, load ATAPI drivers and recognize ATAPI drives automatically. Make sure you have selected this exact key name. How Many Hard Drives Can Be Connected To A Single Ide Cable Primary IDE Slave not detected.

Please reply, greatly appreciate your time. Reply mark says: December 18, 2008 at 12:29 pm working on a computer with two hard drives. Generally, the process involves some combination of Inserting any necessary media (like a recordable CD in a CD-RW drive; not applicable for hard drives) Partitioning the drive (hard disk only) Formatting this content Windows will now scan for any new hardware and should pick up your CD/DVD drive.

Reply Tom says: January 24, 2009 at 4:40 am Hi I am trying to install a new sata drive onto my pc. thanks guys for creating this it sure is a help for newbies out there πŸ™‚ as Kyle said waaaaaay back, "I did'nt know that disk management exist" hehehe Reply Bill R But manufacturers like John Deere and Apple don’t like that idea. Proffitt Forum moderator / December 7, 2006 5:45 AM PST In reply to: SATA & IDE Combination Troubles--but w/ SATA adapters IDE's But I'll decline why since this post is buried

Would you please kindly walk me thru?. Reply Spiv says: March 2, 2008 at 11:49 pm Hi there, I have a notebook with a Fujitsu MHT 2040AT, (40GB 4200rpm HD). The pins beside the PATA slot have a gray block covering two middle pins and it's under Slave. Great step backwards MS.

If, however, you are installing a second IDE drive, it is possible that you will need to alter the jumper configuration of your primary hard drive. the c drive that im using now as like no memary some one told me to stick them in my d/cd or my e/dvd/cd drive to keep them out of my Then press the cable connector down into the drive connector until it fully seats, as shown in Figure 8-4. If you don't like the stock appearance of Google Home, here are two quick and easy ways to make it truly yours.

Generally, if you're adding a second hard drive you would set it up as the primary slave. (The secondary master and slave are usually used for optical drives, although they can help yourself before you can be helped!!! Jun 20, 2009 #21 lechevarria89 TS Rookie Topic Starter Posts: 43 I'm pretty sure that BIOS allows booting from a USB device because I'm able to boot my Windows XP CD by Mad53704 / December 4, 2006 12:48 PM PST In reply to: New SATA HD booting mantining old IDE HDs.

Chances are that you don't need to worry about this. could any one help. Storage forum About This ForumCNET's Forum on storage is the best source for finding help, troubleshooting, and getting buying advice from a community of experts. In the System properties window click the Hardware tab.

The Device manager window will now open.